Vurgulamak: 
                                                customizable industrial exhaust gas purifier, environmental protection equipment for exhaust purification, industrial gas purification equipment with warranty
                              

Customizable Environmental Protection Equipment for Various Types of Industrial Exhaust Gas Purification

Equipment Description

I. Workflow

Exhaust Gas Capture: A hood collects exhaust gas and pipes it to a treatment system.
Primary Purification: A dry filter intercepts particulate matter, while a condenser cools the air (for high-temperature operation).
Oxidative Decomposition:
- Catalytic Combustion: A catalyst decomposes organic matter at high temperatures.
- Photocatalysis/Plasma: Ultraviolet light or a high-voltage electric field oxidizes and degrades pollutants.
Standardized Emissions: Purified gas is monitored and discharged through a chimney after compliance with standards.

II. Technical Parameters

Parameters	Specifications
Air volume	2000-50,000 m³/h (customizable)
Applicable exhaust gas type	VOCs, hydrogen cyanide, hydrogen sulfide, benzene series, organic acids, etc.
Operating temperature	Catalytic combustion: 250-400°C; photocatalytic combustion: room temperature
Emission concentration	VOCs ≤ 50 mg/m³, cyanide ≤ 0.5 mg/m³

III. Equipment Advantages

High-Efficiency Purification: Catalytic combustion achieves a purification rate of ≥95% for high-concentration VOCs, while photocatalysis is suitable for low-concentration, complex exhaust gases.
Energy-Efficient Design: The catalytic combustion heat recovery system reduces energy consumption by over 30%.
Corrosion Resistance: Fiberglass and stainless steel materials withstand acidic, alkaline, and high-temperature environments.
Intelligent Control: Integrated online monitoring and automatic adjustment functions reduce manual intervention.

IV. Operation and Maintenance Key Points

Daily Maintenance: Clean carbon deposits on the catalyst surface quarterly and replace expired catalysts.
Monthly check the UV lamp brightness; replace lamps if they decrease by more than 30%.
Troubleshooting:
- Reduced purification efficiency: Check catalyst activity, UV intensity, or plasma electric field stability.
- Blower Abnormality: Check for impeller corrosion or dust accumulation and calibrate the dynamic balance.

V. Application Scenarios

Electroplating Oxidation Tanks: Treat highly toxic exhaust gases such as cyanide and chromic acid mist.
Chemical Reactors: Degrade benzene and organic solvent volatiles.
Spray Paint Shops: Purify VOCs and paint mist particles.

Main Structures and Components

I. Exhaust Gas Collection System

Gas Collection Hood
- Use corrosion-resistant materials (such as 316L stainless steel or fiberglass) to cover the pollution source.
- A closed or side-suction design improves exhaust gas collection efficiency. The collection air velocity is typically 0.5-1.5 m/s.
- For large-scale or open pollution sources, a multi-point gas collection hood system can be configured in parallel.
Exhaust Duct
- Use fiberglass or PVC materials, with a diameter of 150-500 mm.
- Avoid right-angle bends to reduce air resistance. The duct interior should be smooth to prevent dust adhesion.
- High-temperature exhaust ducts should be insulated (such as aluminum silicate fiber) to prevent heat loss and affect subsequent treatment efficiency.

II. Pretreatment Unit

Dry Filter
- A pre-filter (pore size ≤ 2 mm) intercepts large dust particles and liquid droplets, protecting the downstream oxidation device.
- In some scenarios, a cyclone dust collector can be added to increase dust filtration efficiency to ≥ 90%.
Condenser (Optional)
- For high-humidity or high-temperature exhaust gases (≤150°C), heat exchange is used to cool the exhaust gas to 40-60°C, reducing its volume and recovering some organic matter.

III. Oxidation Purification Unit

Catalytic Combustion Unit (RCO)
- Catalyst Layer: Precious metals (platinum, palladium) or metal oxide catalysts oxidize and decompose VOCs, aldehydes, and other organic matter. The reaction temperature is 250-400°C, with a purification efficiency of ≥95%.
- Heat Exchange System: Ceramic regenerators or multi-tube heat exchangers recover combustion heat, achieving a heat recovery rate of ≥70%, reducing operating energy consumption.
Photocatalytic Oxidation Device
- UV Photolysis Module: Emits 185-254nm ultraviolet light to activate a titanium dioxide (TiO₂) coating, breaking down organic matter into CO₂ and H₂O. Suitable for low-concentration, complex exhaust gases.
- Reaction Chamber: Made of corrosion-resistant quartz glass or 316L stainless steel, with a light transmittance ≥80%.
Plasma Processor
- This device uses high-voltage corona discharge to generate high-energy electrons and free radicals, degrading odorous gases (such as hydrogen sulfide) and difficult-to-degrade organic matter with a treatment efficiency ≥85%.
- The electrode module is made of titanium alloy or ceramic and supports modular replacement to adapt to different operating conditions.

IV. Power and Monitoring System

High-Temperature-Resistant Fan
- Made of fiberglass or alloy, it offers an air volume of 2000-50,000 m³/h and a pressure of 1200-2500 Pa, suitable for high-temperature and corrosive exhaust gases.
- Equipped with a frequency converter to adjust the air volume to match equipment load fluctuations.
Monitoring and Control System
- An integrated VOCs online detector and temperature sensor monitor emission concentrations and equipment operating status in real time, automatically issuing alarms and adjusting treatment parameters when standards are exceeded.
- The chimney height must be ≥ 15 meters, complying with the "Comprehensive Emission Standard for Air Pollutants" (GB16297-1996).

Features

High cost performance: Based on the customer's product positioning and development strategy, and with economic affordability as the foundation, we achieve the best cost performance.

The advanced and meticulous design concept of the equipment, along with the highly automated industrial equipment, showcases the image of a modern and advanced enterprise.

It has high adaptability, meeting the current production requirements and reserving room for development, taking into account the needs of increased production and improved quality in the future.

Quality compliance strictly adheres to the ISO900 quality management system, with every minute detail of the entire equipment installation being strictly controlled.

Tags:

Otomatik Toz Boya Hattı

Elektrostatik toz boya hattı

Elektroforetik kaplama ekipmanları

Elektrostatik Boya hattı

Asılı taşıyıcı sistemi

Kimyasal temizlik hattı

Elektroplating Oksidasyon Üretim hattı

Otomatik daldırma kaplama hattı

Çevre koruma ekipmanları

Yaşlanmayı tespit eden ekipman

Aksesuarlar

Yangın geçirmez kasa

Customizable Environmental Protection Equipment for Various Types of Industrial Exhaust Gas Purification

customizable industrial exhaust gas purifier

environmental protection equipment for exhaust purification

industrial gas purification equipment with warranty

Çevre koruma makineleri,

Çevre koruma sistemi,

Çevre koruma makinesi

Stainless Steel Tower Environmental Protection Equipment for Chemical and Organic Solvent Exhaust Gas

High-Performance Environmental Protection Equipment for Acid Mist and Cyanide Treatment in the Electroplating Industry